Blue Horizons Long Life AlgiMAX Eliminator – Copper Based Algaecide (2 Litres)

1. Maintain pH level within the ideal range of 7.2–7.6. If not in this range, adjust. 2. Check the chlorine level and ensure it is established within the ideal range 1 – 3 mg/l (ppm); 3. Gradually pour the solution into the pool, whilst the pump(s) are turned ‘on’ preferably near the water inlets to aid distribution. 4. After the initial dose this product should last for up to three months before further top ups are required. 5. When used as a Winterising algaecide carry out normal end of season closure procedures (e.g. removing debris and leaves).and ensure good distribution by circulating water whilst the pump(s) are turned ‘on’ for at least 2 hours. Dose rates: Initial dose: add 100 ml to 4,545 litres (1,000 gallons) of water. Top up (3 months): add 50 ml to 4,545 litres (1,000 gallons) of water. ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS.