Blue Horizons Ultimate Water Clarifier Concentrate (1 Litre)

1. Prior to application of the product, ensure the filter is operating efficiently (i.e. is not the reason for cloudy water), backwash to filter is necessary. 2. Maintain pH level within the ideal range of 7.2-7.6. If the pH is not in this range, adjust accordingly. 3. Using the prescribed dose rates in the table below, add Ultimate Water Clarifier Concentrate directly to your pool whilst the pump is running, preferably near the water inlets to aid distribution throughout the pool. 4. Keep your filtration systems turned on until clarity is restored. 5. It may be necessary to backwash to filter again after this procedure to remove all collected debris, prior to the resumption of normal filtration cycles. Dose rates: Condition of water. Hazy: add 9 ml for 4,545 litres (1,000 gallons) of water. Murky: add 18 ml for 4,545 litres (1,000 gallons) of water. NOTE: Do not use more than the recommended dose rate. Overdosing may reduce product efficiency. Always allow 24 hours for treatment to work, then if necessary repeat dose. ALWAYS ADD CHEMICALS TO WATER & NOT WATER TO CHEMICALS. NEVER MIX CHEMICALS.