Intex 28684 Electric Pool Heater

Electric pool heat pump with water level sensor, compatible with round Easy Set / Metal Frame above ground pools 12′ (3.6m) diameter, 14ft x 7ft x 3 ft (4.5m x 2.2m x 85cm) rectangular pools or smaller (maximum 2,081 gallons / 9,463 ltr / 2,500 US gallons, water capacity).  Working water temperature: 17 degrees Celsius to 35 degrees Celsius (PLEASE NOTE: The ambient temperature of the air and water have an effect on the water heat up efficiency.  The heater will perform best in the summer months. Most of the heat is lost at night time, so using a solar cover will help reducing the heat loss.  Also, for best performance keep the filter clean and replace it every two weeks when the pool is in heavy use. Dirty filters might cause tripping as the water flow is reduced.  Easy hook-up (easily connects to new or existing pool filter system) and operation.  Includes one hose 1.25″ (32mm) fittings, includes pool thermometer.  Model HT30221-1.  UK 3 pin plug.  Voltage: 220-240V. 2.2 kW output.  PLEASE NOTE: The filter pump must be operating before turning on the heater.  The heater must be plugged in directly to a socket and not used on an extension lead unless it is a heavy duty lead !!

OFFICIAL UK DISTRIBUTOR 

All electrical Intex accessories are manufactured with UK 3-pin plugs. No adapters required for the UK! 

All returns handled within the UK

Telphone advice and guidance available